Cable Tracer and Toner

Cable Tracer and Toner

Part Code: 41183

DESCRIPTION

Cable Tracer & Toner is a Network/LAN Installation, Maintenance and Troubleshooting Tool. This tool correctly identifies a particular cable from a bundle of cables/ wires. The tool comes with multiple connection options, which enable it to test telecom, Twisted pair cables, coax cable and bare wires.

Key Features

  • Enhancing talk battery power supply, allows communication over inactive Pairs, using telephone test sets
  • Tests Cable Continuity,
  • Line 1 and Line 2 polarity Testing
  • line polarity and voltage in data and voice lines identification.
  • Uses tone signal with adjustable volume control
  • Two alligator clips, RJ12 Modular cable, RJ45 Jack and a Female coaxial connector included

SPECIFICATION

  • Technical Specifications

    Cable Tracer
    Toner: Hi Alternating 500-781 Hz
    Frequency: Lo Alternating 446-657 Hz
    Talk Battery: 9V into a 600 Ohms Circuit
    Voltage Protection: 50VDC or 24 VAC
    Battery: 9V DC standard or alkaline
    Size: 125 x 68 x 26 mm
    Weight: 20 Grams
    Toner
    Gain:30db
    Tip Resistance:30 ohms (plastic tip)
    Size:210 x 40 x 28mm
    Weight:140 Grams
    Operating Temperature:0°C to 40°C
Read more

Data Cable Length Measuring & Fault Locator

Data Cable Length Measuring & Fault Locator

Part Code: 41184

DESCRIPTION

High Speed Gigabit Ethernet UTP 250 MHz Class E / Category 6 Cable Consists of HDPE Insulated 8 x 23AWG Solid Bare Electrolytic Grade Copper Conductors Twisted as 4 Pairs, RipCord and FRPVC Outer Jacket. These Structured Cable Suitable for Gigabit Ethernet (1000Base-T) Requirement for Applications such as High-Speed Data, Voice & Video Signals over LANs, Server Farms and Other Bandwidth Sensitive Indoor Applications. This cable guarantees Category 6 performance ensuring maximum network speed, data throughput, and efficiency

Key Features

  • The Lan tester can check UTP and STP Cat5e, Cat6, Cat6A and coaxial cable
  • It can identify and locate the distance of open or short circuit
  • With the multifunction tester we can determine the continuity and wiring of the cable pattern
  • Comes with the low battery indicator
  • It uses TDR (time domain reflectometer) to measure the length and distance of the cable
  • LCD backlight display
  • There are 8 remote ID available
  • Memory mode for 8 memory test results
  • Covered under 3C3® Standard Product Warranty

SPECIFICATION

  • Technical Specification

    Display:LCD Module (64 mm x 33 mm)
    Connector Type:RJ45, RJ12 ( RJ11 ) & F connector
    Cable Type:Shielded or unshielded, Cat5e, Cat6, Cat7
    Error Status:Open circuit, short circuit, cross circuit and split pairs
    Measure Type:Measures cable length via TDR
    Checks and verifies wire map
    Generates two different tracing tones to help identify users
    Cable Length & Accuracy:Accuracy of the length measurement is ± 5 %
    length: 1~350 meters (3~1200 feet)
    Minimum Cable Length For Testing of Split Pairs:1 meter (3 feet)
    Power Source:9 Volt battery
    Detects a low battery condition.
    Turns Off Automatically:Auto-off in any mode and low power consumption for long battery life
    Physical Dimension:195 mm (L) , 90 mm (W) , 40 mm (H)
    Input protection:Protection against excess voltage, transients ringer signal
    Operating Temperature:00C to 500C
    Storage Temperature:-100C to 600C
    Humidity:-10 % to 90 % non-condensing
Read more

PoE Tester

PoE Tester

Part Code: 41180

DESCRIPTION

The PoE Tester is designed for speed testing and verifying standard active and passive PoE networks as well as measuring power level of a PoE system even with reversed polarity on IEEE 802.3af (PoE), 802.3at (PoE+) and 802.3bt (PoE++) type3 compliant standard PoE. Voltage Range: 30V to 60V

Max Current: 750 mA each pair, total, 1.5Amps

By performing both one-site PSE voltage testing and In-line (PSE/PD) power level testing.

  • PSE testing – Identifies the presence and proper voltage for PoE application as well as verifies the PSE is delivering voltage power compliant with alternative End (A) or Mid (B) or both and with REV LEDs indicate a reversed power in either IEEE 802.3af or 802.3at or 802.3bt compliant standard. (Note: the tester displays 802.3 at instead of 802.3bt present.)
  • Inline testing – Measures and displays in rotation between voltage (Volts), current (mA) and power (Watts) via 4 digit 7 segment LEDs, which provides Voltage available, current flowing and how much power an PD actually need ensure a sufficient power for PD.

The tester built-in a Gigabit Ethernet transformer for PoE+ Application with up 1.1 Amps tolerance continuous for each pair total 2.2 Amps to isolate data passes and measure power without interruption of data. It can accurately and continuously measure and display the power level of PoE at In-line testing. They also equipped with a step button for selecting specific test data for easier reading.

The PoE tester is a handy professional diagnostic tool for speed up installing and troubleshooting PoE enabled device, and validating actual power let cable installers to save time surety that PD receives appropriate power.

Key Features

  • Provides a simple way to test and set up PoE system and troubleshoot connection issues.
  • Detects and displays standard active and passive PoE includes type, sources, polarity and power
  • Performs both one-site PSE testing for voltage and In-line PSE/PD testing for power
  • Determines if switch or outlet has PoE capability and display power at PD connected.
  • PSE testing displays PoE type (af/at), power source (End/Mid), polarity and voltage, without need a load.
  • In-line testing measures and displays in rotation between voltage (Volts) current (mA) and power (Watts).
  • Determines the value of power to ensure that a powered device actually need.
  • Confirms your PoE network system for just all the power you do need.
  • Built-in Gigabit/PoE+ transformer to isolate data passes without interruption of data.
  • Equipped with a step button for selecting specific test data for easier reading.
  • Compliant with IEEE 802.3af, at and bt (type3) standard PoE.
  • Plug and play for ease of use with battery-free operation

SPECIFICATION

  • Technical Specifications

    Connector Interface:2X RJ45 jack (PSE test jack, PD test jack)
    Step Button:For selecting specific data to display. Default display for voltage value.
    Display:*4 LEDs indicate IEEE 802.3af or 802.3at standard.
    *Dual 7-digit LEDs indicate power source either End (A) Span (1/2, 3/6) or Mid (B) span (4/5, 7/8) or both.
    * 2 Yellow LEDs indicate reversed polarity for power type.
    * Display in rotation between voltage (U) (Volts), current (A) (mA or Amp) and power (P) (Watts).
    Voltage Range:Max 30V to 60V for mode A and Mode B. (1% accuracy)
    Max Current:750mA for Mode A and Mode B, total 1.5 Amps.
    Gigabit(PoE+)Ethernet Transformer:Support 10/100 and Gigabit data rates, isolated data passes Through for all 4 pairs.
    With 1.1 Amp tolerance continuous for each pair.
    Standard compliant:IEEE 802.3af (PoE), 802.3at (PoE+), and 802.3bt (PoE++) type3.
    Testing:One–ended testing–PSE.
    In-line testing – between PSE and PD.
    Tester load loss:0.75W
    Operating Temperature

    Storage Temperature

    :0°C to 50°C
    -20°C to 55°C
    Operating Humidity:MAX 90% non – condensing.
    Size:99 X 36 X 26mm
    Weight:50 Grams
Read more

LAN TRACKER

LAN TRACKER

Part Code: 41181

DESCRIPTION

The Lan Tracker is a network tester, pin-by-pin cable tester. As a network tester, it detects whether a network is active or inactive and displays network speed (10/100/1000 Mbps) in either case. It also flashes the network hub or NIC’s port light corresponding to the cable it is connected to, to show the cable’s port number. As a cable tester, it performs loop-back or remote tests of network, data, voice, and coaxial cables, displaying the results on a pin-by-pin LED display which moves from pin to pin automatically or manually.

Key Features

  • Detects network speed (10/100/1000 Mbps) of an active OR inactive network.
  • Automatic and manual pin-by-pin tests of cable up to 8 pins.
  • Manual pin-by-pin test may go forward or backward through pins at user’s option.
  • Remote unit included for testing already-installed cables.
  • Coaxial F adaptor included for testing coaxial cables.
  • Line tester checks circuit polarity and AC/DC voltage to prevent damage to tester.

SPECIFICATION

  • Technical Specifications

    Power:9V Alkaline Battery – Main Unit
    Size:Main unit – 126 x 68 x 28 mm
    Remote Unit –
    Weight:195g with battery (Shipping weight:320g)
    Operating Temperature:0 to 450C
    Material:ABS
    Tone Frequency:800 Hz
    Cable Type/ Protocols supported:UTP, STP, 10 Base-T, Token Ring, TP-PMD, BNC and USOC 8, 4, 2 cables
    Distance maximum Length:457 Meters
    Power Consumption:10- 40mA/Sec
    Output Voltage:5V
Read more

LAN TESTER

LAN TESTER

Part Code: 41182

DESCRIPTION

Multi-Functional Network Cable Tester allows you to test wiring continuity for Cat5e, Cat6, Cat6A, RJ11 6P and RJ45 8P. It Identifies, short circuits, open circuits and miswired Cables. Features two pieces, i.e. transmitter and receiver.

Key Features

  • Tests RJ45 (8P8C) UTP, STP Cable.
  • Two-piece design.
  • Master Unit provides Patch cord function Test.
  • Maximum Testing length up to 305meters
  • Durable case with a built in handle for easy transportation
  • Rubber grip feet to prevent the unit from slipping off flat surfaces
  • Runs on one 9V battery (included)
  • Backed by a 1-year 3C3® Product warranty
Read more
2020-03-23_175618

CALL US

In case you wish to speak to our Customer Help Desk for urgent resolution. +91-80-4851 4828
MESA

WRITE TO US

Be it an enquiry, feedback  write to us & we’ll get back to you.
sales@3c3.in
geo-1-50x50

LOCATE US

You are never too far away from quick, efficient services.
Locate nearest Dealer
Comcore Connexions Help Desk