Cable Tracer and Toner

Cable Tracer and Toner

Part Code: 41183

DESCRIPTION

Cable Tracer & Toner is a Network/LAN Installation, Maintenance and Troubleshooting Tool. This tool correctly identifies a particular cable from a bundle of cables/ wires. The tool comes with multiple connection options, which enable it to test telecom, Twisted pair cables, coax cable and bare wires.

Key Features

  • Enhancing talk battery power supply, allows communication over inactive Pairs, using telephone test sets
  • Tests Cable Continuity,
  • Line 1 and Line 2 polarity Testing
  • line polarity and voltage in data and voice lines identification.
  • Uses tone signal with adjustable volume control
  • Two alligator clips, RJ12 Modular cable, RJ45 Jack and a Female coaxial connector included

SPECIFICATION

  • Technical Specifications

    Cable Tracer
    Toner: Hi Alternating 500-781 Hz
    Frequency: Lo Alternating 446-657 Hz
    Talk Battery: 9V into a 600 Ohms Circuit
    Voltage Protection: 50VDC or 24 VAC
    Battery: 9V DC standard or alkaline
    Size: 125 x 68 x 26 mm
    Weight: 20 Grams
    Toner
    Gain:30db
    Tip Resistance:30 ohms (plastic tip)
    Size:210 x 40 x 28mm
    Weight:140 Grams
    Operating Temperature:0°C to 40°C
Read more

FTP Termination Tool

FTP Termination Tool

Part Code: 41089-1

DESCRIPTION

FTP Termination Tool has been specifically designed to terminate the 3C3® Cat6A Shielded and Cat6 Unshielded Field Termination plugs. The single action operation terminates all 8 conductors helping to ensure the quality and consistency of the connections and reducing installation time.

Key Features

  • Rugged and robust design
  • Saves time with fast termination process
  • Guaranteed reusability and consistent connection
  • Covered under 3C3® Standard Product Warranty

SPECIFICATION

  • Technical Specification

    Grip:PBT+15%GF UL 94V-0
    Base:PBT+15%GF UL 94V-0
    Crimping Det:PC+10%GF UL 94V-0
    Shaft:Steel Nickel Plating
    Spring:SUS304
    Dimension:100  x 98 x 28 mm
Read more

Unshielded/Shielded Cable Stripper, Black

Unshielded/Shielded Cable Stripper, Black

Part Code: 41082

DESCRIPTION

Unshielded & Shielded Cable stripper is the best tool that you’ll ever use for stripping all Unshielded (Cat5e, Cat6, etc.) and Shielded (Cat5) cables. The stripper is fast and precise, and never nicks the wire. This tool is a great time saver for both novices and professionals.

Key Features

  • Can be used strips round Cat5e and Cat6 UTP/STP cables
  • Compact Size
  • Fast & Precise
  • Fixed Blade
  • Time Saving Tool
  • Covered under 3C3® Standard Product Warranty

SPECIFICATION

  • Mechanical Specification

    Length:87mm
    Cable Diameter (outer):5.5 – 6.5 mm
    Blade:SK5
    Weight:23g
    Material:ABS
Read more

Rapid Termination Tool

Rapid Termination Tool

Part Code: 41087

DESCRIPTION

Rapid termination tool increases accuracy by seating and terminating all wires at once with a simple squeeze of the handle and saves installation time. Rapid tool allows you to terminate jacks eight times faster than traditional impact tools – with accuracy that cannot be matched doing it manually.

Key Features

  • Reduces installation time – easy to use crimps and cuts all wires at once Sturdy, lightweight handle reduces hand-fatigue Locking handle, keeping it compact for storage
  • High quality, consistent terminations – no more compromised connections and wasted Outlets
  • Simple, one-handed operation with an ergonomically designed handle reduces hand fatigue
  • Replaceable blade head for use with multiple jack types
  • It can be used for Cat5e, Cat6, Cat6A 3C3® Outlets
  • Built in housing to keep jacks in place, allowing for accurate terminations each and every time
  • Covered under 3C3® Standard Product Warranty

SPECIFICATION

  • Mechanical Specification

    Main Body:Carbon Steel
    Replacement Blade Material:Alloy Steel
    Finished:Black Oxide
    Keystone Socket:PC+ABS  High Impact UL 94V-0 Thermoplastic
    Replacement Blade:2000 Terminations Cycle
    Contact Compatibility:Accommodate 22 to 24 AWG
    Dimension:290 × 120 × 40 mm
    Weight:0.5 kg
    Cable Capacity:  24 ( 8 Slots x 3 Nos )
    Cable Hole Diameter:8.5 mm Nominal
    Storage Temperature:-150C TO 500C.
    Humidity:10%~90%RH
Read more

Cable Bunching Tool

Cable Bunching Tool

Part Code: 41085

DESCRIPTION

The Cable Bunching Tool efficiently arranges up to 24 data cables to optimize bundle size and improve installed appearance. The organized cables can then be easily secured using Velcro’s & Loop Cable Ties. The tool’s ergonomic, compact design is comfortable for installers to handle and also works well in tight spaces.

Key Features

  • Reduces cable installation time up to 50% compared to traditional methods
  • Arrange cables in up to 24 positions for optimal bundle size and aesthetics
  • Two inserts handle multiple network cable diameters
  • Unique design allows twist-free bundling from the end or the middle of bundle
  • Smooth edges; safe for use on network cables preventing cable abrasion
  • Impact resistant material and low friction design to glide smoothly across cable bundle
  • Covered under 3C3® Standard Product Warranty

SPECIFICATION

  • Mechanical Specification

    Dimension:75mm Diameter / 20mm Thickness
    No of Slots:   8
    Cable Capacity:  24 ( 8 Slots x 3 Nos )
    Cable Hole Diameter:8.5 mm Nominal
Read more

Data Cable Length Measuring & Fault Locator

Data Cable Length Measuring & Fault Locator

Part Code: 41184

DESCRIPTION

High Speed Gigabit Ethernet UTP 250 MHz Class E / Category 6 Cable Consists of HDPE Insulated 8 x 23AWG Solid Bare Electrolytic Grade Copper Conductors Twisted as 4 Pairs, RipCord and FRPVC Outer Jacket. These Structured Cable Suitable for Gigabit Ethernet (1000Base-T) Requirement for Applications such as High-Speed Data, Voice & Video Signals over LANs, Server Farms and Other Bandwidth Sensitive Indoor Applications. This cable guarantees Category 6 performance ensuring maximum network speed, data throughput, and efficiency

Key Features

  • The Lan tester can check UTP and STP Cat5e, Cat6, Cat6A and coaxial cable
  • It can identify and locate the distance of open or short circuit
  • With the multifunction tester we can determine the continuity and wiring of the cable pattern
  • Comes with the low battery indicator
  • It uses TDR (time domain reflectometer) to measure the length and distance of the cable
  • LCD backlight display
  • There are 8 remote ID available
  • Memory mode for 8 memory test results
  • Covered under 3C3® Standard Product Warranty

SPECIFICATION

  • Technical Specification

    Display:LCD Module (64 mm x 33 mm)
    Connector Type:RJ45, RJ12 ( RJ11 ) & F connector
    Cable Type:Shielded or unshielded, Cat5e, Cat6, Cat7
    Error Status:Open circuit, short circuit, cross circuit and split pairs
    Measure Type:Measures cable length via TDR
    Checks and verifies wire map
    Generates two different tracing tones to help identify users
    Cable Length & Accuracy:Accuracy of the length measurement is ± 5 %
    length: 1~350 meters (3~1200 feet)
    Minimum Cable Length For Testing of Split Pairs:1 meter (3 feet)
    Power Source:9 Volt battery
    Detects a low battery condition.
    Turns Off Automatically:Auto-off in any mode and low power consumption for long battery life
    Physical Dimension:195 mm (L) , 90 mm (W) , 40 mm (H)
    Input protection:Protection against excess voltage, transients ringer signal
    Operating Temperature:00C to 500C
    Storage Temperature:-100C to 600C
    Humidity:-10 % to 90 % non-condensing
Read more

Copper Tool Kit

Copper Tool Kit

Part Code: 41089

DESCRIPTION

Copper Tool kit comprises of all necessary tools required for quick and efficient installation & troubleshooting of Copper networking components. All the tools & components are provided with a carry case.

Key Features

  • Carry Case 263 x 56 x 182 mm
  • RJ45 Crimping Tool
  • Non-Impact Punch Down Tool
  • Simple UTP/STP Cable Stripper
  • LAN Tester
  • Krone Tool
  • RJ45 connector

SPECIFICATION

    Read more

    RJ45 RJ11 Crimping Tool with Cable Tester

    RJ45 RJ11 Crimping Tool with Cable Tester

    Part Code: 41084

    DESCRIPTION

    RJ45/ RJ11 Crimping Tool with Cable Tester is specifically designed for RJ45 & RJ11 connector terminations with Cat5e, Cat6 & Cat6A cables. This also have facility for testing the cables for continuity/ polarity. This ratcheting, high-leverage crimp tool is ultra-stable for repeated terminations. This tool is ideal to provide high-performance. Larger OD cables that are tougher to terminate due to larger wire gauges, thicker, harder insulation and pair-separating splines also can be terminated using this tool.

    Key Features

    • Used for Termination of Unshielded and Shielded twisted pair cables
    • Provided with test Jack compatible for UTP & STP connector
    • In-built wiring indicators providing Short, Miss wire, Reversal, Split Pair status
    • Indication provided for Pair and Shield continuity
    • Can be used as a Debugging tool for any continuity issues
    • Removable Probe for testing far point of a lengthy cable
    • Locking feature provided to keep the tool in compact form

    SPECIFICATION

    • Technical Specification

      Cables Supported:Single Pair, Two Pair, Four Pair (Shielded/Unshielded)
      Size (Length):220mm
      Weight:525 Grams
      Batteries:6 volt A544 1/2AA size battery or 4LR44 Button cell batteries
      Maximum Testing Length tested:90m
      Installation Temperature:-100C ~ +600C
    Read more

    PoE Tester

    PoE Tester

    Part Code: 41180

    DESCRIPTION

    The PoE Tester is designed for speed testing and verifying standard active and passive PoE networks as well as measuring power level of a PoE system even with reversed polarity on IEEE 802.3af (PoE), 802.3at (PoE+) and 802.3bt (PoE++) type3 compliant standard PoE. Voltage Range: 30V to 60V

    Max Current: 750 mA each pair, total, 1.5Amps

    By performing both one-site PSE voltage testing and In-line (PSE/PD) power level testing.

    • PSE testing – Identifies the presence and proper voltage for PoE application as well as verifies the PSE is delivering voltage power compliant with alternative End (A) or Mid (B) or both and with REV LEDs indicate a reversed power in either IEEE 802.3af or 802.3at or 802.3bt compliant standard. (Note: the tester displays 802.3 at instead of 802.3bt present.)
    • Inline testing – Measures and displays in rotation between voltage (Volts), current (mA) and power (Watts) via 4 digit 7 segment LEDs, which provides Voltage available, current flowing and how much power an PD actually need ensure a sufficient power for PD.

    The tester built-in a Gigabit Ethernet transformer for PoE+ Application with up 1.1 Amps tolerance continuous for each pair total 2.2 Amps to isolate data passes and measure power without interruption of data. It can accurately and continuously measure and display the power level of PoE at In-line testing. They also equipped with a step button for selecting specific test data for easier reading.

    The PoE tester is a handy professional diagnostic tool for speed up installing and troubleshooting PoE enabled device, and validating actual power let cable installers to save time surety that PD receives appropriate power.

    Key Features

    • Provides a simple way to test and set up PoE system and troubleshoot connection issues.
    • Detects and displays standard active and passive PoE includes type, sources, polarity and power
    • Performs both one-site PSE testing for voltage and In-line PSE/PD testing for power
    • Determines if switch or outlet has PoE capability and display power at PD connected.
    • PSE testing displays PoE type (af/at), power source (End/Mid), polarity and voltage, without need a load.
    • In-line testing measures and displays in rotation between voltage (Volts) current (mA) and power (Watts).
    • Determines the value of power to ensure that a powered device actually need.
    • Confirms your PoE network system for just all the power you do need.
    • Built-in Gigabit/PoE+ transformer to isolate data passes without interruption of data.
    • Equipped with a step button for selecting specific test data for easier reading.
    • Compliant with IEEE 802.3af, at and bt (type3) standard PoE.
    • Plug and play for ease of use with battery-free operation

    SPECIFICATION

    • Technical Specifications

      Connector Interface:2X RJ45 jack (PSE test jack, PD test jack)
      Step Button:For selecting specific data to display. Default display for voltage value.
      Display:*4 LEDs indicate IEEE 802.3af or 802.3at standard.
      *Dual 7-digit LEDs indicate power source either End (A) Span (1/2, 3/6) or Mid (B) span (4/5, 7/8) or both.
      * 2 Yellow LEDs indicate reversed polarity for power type.
      * Display in rotation between voltage (U) (Volts), current (A) (mA or Amp) and power (P) (Watts).
      Voltage Range:Max 30V to 60V for mode A and Mode B. (1% accuracy)
      Max Current:750mA for Mode A and Mode B, total 1.5 Amps.
      Gigabit(PoE+)Ethernet Transformer:Support 10/100 and Gigabit data rates, isolated data passes Through for all 4 pairs.
      With 1.1 Amp tolerance continuous for each pair.
      Standard compliant:IEEE 802.3af (PoE), 802.3at (PoE+), and 802.3bt (PoE++) type3.
      Testing:One–ended testing–PSE.
      In-line testing – between PSE and PD.
      Tester load loss:0.75W
      Operating Temperature

      Storage Temperature

      :0°C to 50°C
      -20°C to 55°C
      Operating Humidity:MAX 90% non – condensing.
      Size:99 X 36 X 26mm
      Weight:50 Grams
    Read more

    Universal Cable Jacket Stripper with Cutter

    Universal Cable Jacket Stripper with Cutter

    Part Code: 41081

    DESCRIPTION

    Jacket Stripper have adjustable stripping blades for different diameter & insulation thickness to prevent the damage of shielding and conductors. Equipped with Coaxial cable stripper, Round cable stripper, cutter and flat cable stripper

    Key Features

    • Strips round Cat5E, Cat6 UTP/STP & flat cables
    • Compact Size
    • Adjustable Screw for varied cable diameters to avoid scoring interior conductor insulation.
    • Strips Diameter: 4mm – 7mm
    • Cut Diameter: ≤9mm
    Read more
    2020-03-23_175618

    CALL US

    In case you wish to speak to our Customer Help Desk for urgent resolution. +91-80-4851 4828
    MESA

    WRITE TO US

    Be it an enquiry, feedback  write to us & we’ll get back to you.
    sales@3c3.in
    geo-1-50x50

    LOCATE US

    You are never too far away from quick, efficient services.
    Locate nearest Dealer
    Comcore Connexions Help Desk