COPPER TOOLS
3C3 is one among the leading manufacturers of Copper Tools and Crimping Tool with Cable Tester in India. These compact and aesthetic looking copper tools are used in installations and testing copper cable connectivity. POE Testers tests the cabling infrastructure for the presence of power and helps identify the existence and type of Power Sourcing Equipment. The compact designs are specifically tailored for system integrators and installers.
3C3 is a manufacturer of Copper Tools and unique tools under the Make in India initiative that enjoys unrivaled demand and acceptance at home and in International markets.
Our range of Copper Tools includes:
FTP Termination Tool
Product Code: 41089-1
FTP Termination Tool has been specifically designed to terminate the 3C3® Cat6A Shielded and Cat6 Unshielded Field Termination plugs. The single action operation terminates all 8 conductors helping to ensure the quality and consistency of the connections and reducing installation time.
- Rugged and robust design
- Saves time with fast termination process
- Guaranteed reusability and consistent connection
- Covered under 3C3® Standard Product Warranty
| Grip | : | PBT+15%GF UL 94V-0 |
| Base | : | PBT+15%GF UL 94V-0 |
| Crimping Det | : | PC+10%GF UL 94V-0 |
| Shaft | : | Steel Nickel Plating |
| Spring | : | SUS304 |
| Dimension | : | 100 x 98 x 28 mm |
Universal Cable Jacket Stripper with Cutter
Product Code: 41081
Jacket Stripper have adjustable stripping blades for different diameter & insulation thickness to prevent the damage of shielding and conductors. Equipped with Coaxial cable stripper, Round cable stripper, cutter and flat cable stripper.
- Strips round Cat5E, Cat6 UTP/STP & flat cables
- Compact Size
- Adjustable Screw for varied cable diameters to avoid scoring interior conductor insulation.
- Strips Diameter: 4mm – 7mm
- Cut Diameter: ≤9mm
| Connector Interface | : | 2X RJ45 jack (PSE test jack, PD test jack) |
| Step Button | : | For selecting specific data to display. Default display for voltage value. |
| Display | : | *4 LEDs indicate IEEE 802.3af or 802.3at standard. *Dual 7-digit LEDs indicate power source either End (A) Span (1/2, 3/6) or Mid (B) span (4/5, 7/8) or both. * 2 Yellow LEDs indicate reversed polarity for power type. * Display in rotation between voltage (U) (Volts), current (A) (mA or Amp) and power (P) (Watts). |
| Voltage Range | : | Max 30V to 60V for mode A and Mode B. (1% accuracy) |
| Max Current | : | 750mA for Mode A and Mode B, total 1.5 Amps. |
| Gigabit(PoE+)Ethernet Transformer | : | Support 10/100 and Gigabit data rates, isolated data passes Through for all 4 pairs. With 1.1 Amp tolerance continuous for each pair. |
| Connector Interface | : | 2X RJ45 jack (PSE test jack, PD test jack) |
| Standard compliant | : | IEEE 802.3af (PoE), 802.3at (PoE+), and 802.3bt (PoE++) type3. |
| Testing | : | One–ended testing–PSE. In-line testing – between PSE and PD. |
| Tester load loss | : | 0.75W |
| Operating Temp. Storage Temp. | : | 32°F to 122°F (0°C to 50°C). -40°F to 131°F (-20°C to 55°C). |
| Operating Humidity | : | MAX 90% non – condensing. |
| Size | : | 99 X 36 X 26mm / 3.9 X 1.4 X 1 inch. 0.1lb / 1.6oz. |
Note: Cable dissipation (Voltage drop), over a 100m (328ft) length, Cat 5 or higher (12.5Ω)
Non-Impact Punch Down Tool
Product Code: 41083-0
High performance Non-Impact Punch Down Tool terminates twisted-pair wires on 110 punch-blocks. This tool has reversible blades for cutting and non-cutting punch down termination.
- 2 in 1 tool, safe, lightweight and handy, easy to carry.
- Blades are interchangeable/twistable and reversible.
- Used on Krone and 110/88 type (w/cut)
- Seat and cut cable terminations with the user applied forces
- Includes full 110 blades for data applications
- Impact tool Style blade holding design keeps blade locked in
- Tapered design and over-moulded cushioned body
Impact Punch Down Tool
Product Code: 41083-1
The standard punch-down tool is ergonomically designed for comfort, has easy to install twist and lock blades and has both 110 and 66 blades available.
- Suitable for 110 cross-connect or on reversible termination block for punch and cut or punch only.
- Compact body is easily stored or carried in your tool box, tool bag or pocket.
- Spring-loaded design provides a fast, low-effort wire seating and termination.
- Internal impact mechanism eliminates jamming for longer, trouble-free service life.
- Universal-type tool uses standard twist and lock blades for terminations.
- Clearly labelled on the cutting side to reduce costly punching errors
- Made of high-carbon tool steel, heat-treated and precision ground for long life
- Reversible blades for seating/cut, or seating only for jumper wires
- Rust-resistant finish to ensure years of use
| Length | : | 146mm |
| Width | : | 38mm |
| Depth | : | 30mm |
| Blades type | : | 66-Style, 110-Style |
| Blade length | : | 58mm |
| Diameter | : | 12mm |
Twisted Pair Cable Stripper
Product Code: 41080
Twisted Pair Cable Strippers are small enough to fit into the pocket and provide quality cable preparation. This tool will quickly remove the jacket from UTP and FTP/STP cables. In addition, provided with an IDC 110 style contact blade that can be used to punch leads to connectors or patch panels.
- Self-regulating strip depth
- Usable for Twisted Pair cable preparation jacket removal
- Built-in 110 punch down (punch only)
- Compact design
- Fast and easier cable striping & punching
| Compatible Wire diameter | : | 5-6.2mm |
| Color | : | Yellow |
| Material | : | ABS |
| Blade material | : | Stainless Steel |
| Dimensions | : | 6 x 34 x 95mm |
| Weight | : | 10 Grams |
RJ45 RJ11 Crimping Tool with Cable Tester
Product Code: 41084
RJ45/ RJ11 Crimping Tool with Cable Tester is specifically designed for RJ45 & RJ11 connector terminations with Cat5e, Cat6 & Cat6A cables. This also have facility for testing the cables for continuity/ polarity. This ratcheting, high-leverage crimp tool is ultra-stable for repeated terminations. This tool is ideal to provide high-performance. Larger OD cables that are tougher to terminate due to larger wire gauges, thicker, harder insulation and pair-separating splines also can be terminated using this tool.
- Used for Termination of Unshielded and Shielded twisted pair cables
- Provided with test Jack compatible for UTP & STP connector
- In-built wiring indicators providing Short, Miss wire, Reversal, Split Pair status
- Indication provided for Pair and Shield continuity
- Can be used as a Debugging tool for any continuity issues
- Removable Probe for testing far point of a lengthy cable
- Locking feature provided to keep the tool in compact form
| Cables Supported | : | Single Pair, Two Pair, Four Pair (Shielded/Unshielded) |
| Size (Length) | : | 220mm |
| Weight | : | 525 Grams |
| Batteries | : | 6 volt A544 1/2AA size battery or 4LR44 Button cell batteries |
| Maximum Testing Length tested | : | 90m |
| Installation Temperature | : | -100C ~ +600C |
Unshielded/Shielded Cable Stripper, Black
Product Code: 41082
Unshielded & Shielded Cable stripper is the best tool that you’ll ever use for stripping all Unshielded (Cat5e, Cat6, etc.) and Shielded (Cat5) cables. The stripper is fast and precise, and never nicks the wire. This tool is a great time saver for both novices and professionals
- Can be used strips round Cat5e and Cat6 UTP/STP cables
- Compact Size
- Fast & Precise
- Fixed Blade
- Time Saving Tool
- Covered under 3C3® Standard Product Warranty
| Length | : | 87mm |
| Cable Diameter (outer) | : | 5.5 – 6.5 mm |
| Blade | : | SK5 |
| Weight | : | 23g |
| Material | : | ABS |
Rapid Termination Tool
Product Code: 41087
Rapid termination tool increases accuracy by seating and terminating all wires at once with a simple squeeze of the handle and saves installation time. Rapid tool allows you to terminate jacks eight times faster than traditional impact tools – with accuracy that cannot be matched doing it manually.
- Reduces installation time – easy to use crimps and cuts all wires at once Sturdy, lightweight handle reduces hand-fatigue Locking handle, keeping it compact for storage
- High quality, consistent terminations – no more compromised connections and wasted Outlets
- Simple, one-handed operation with an ergonomically designed handle reduces hand fatigue
- Replaceable blade head for use with multiple jack types
- It can be used for Cat5e, Cat6, Cat6A 3C3® Outlets
- Built in housing to keep jacks in place, allowing for accurate terminations each and every time
- Covered under 3C3® Standard Product Warranty
| Main Body | : | Carbon Steel |
| Replacement Blade Material | : | Alloy Steel |
| Finished | : | Black Oxide |
| Keystone Socket | : | PC+ABS High Impact UL 94V-0 Thermoplastic |
| Replacement Blade | : | 2000 Terminations Cycle |
| Contact Compatibility | : | Accommodate 22 to 24 AWG |
| Dimension | : | 290 × 120 × 40 mm |
| Weight | : | 0.5 kg |
Cable Bunching Tool
Product Code: 41085
The Cable Bunching Tool efficiently arranges up to 24 data cables to optimize bundle size and improve installed appearance. The organized cables can then be easily secured using Velcro’s & Loop Cable Ties. The tool’s ergonomic, compact design is comfortable for installers to handle and also works well in tight spaces.
- Reduces cable installation time up to 50% compared to traditional methods
- Arrange cables in up to 24 positions for optimal bundle size and aesthetics
- Two inserts handle multiple network cable diameters
- Unique design allows twist-free bundling from the end or the middle of bundle
- Smooth edges; safe for use on network cables preventing cable abrasion
- Impact resistant material and low friction design to glide smoothly across cable bundle
- Covered under 3C3® Standard Product Warranty
| Dimension | : | 75mm Diameter / 20mm Thickness |
| No of Slots | : | 8 |
| Cable Capacity | : | 24 ( 8 Slots x 3 Nos ) |
| Cable Hole Diameter | : | 8.5 mm Nominal |
PoE Tester
Product Code: 41180
The PoE Tester is designed for speed testing and verifying standard active and passive PoE networks as well as measuring power level of a PoE system even with reversed polarity on IEEE 802.3af (PoE), 802.3at (PoE+) and 802.3bt (PoE++) type3 compliant standard PoE.
Voltage Range: 30V to 60V.
Max Current: 750 mA each pair, total, 1.5Amps
By performing both one-site PSE voltage testing and In-line (PSE/PD) power level testing.
- PSE testing – Identifies the presence and proper voltage for PoE application as well as verifies the PSE is delivering voltage power compliant with alternative End (A) or Mid (B) or both and with REV LEDs indicate a reversed power in either IEEE 802.3af or 802.3at or 802.3bt compliant standard. (Note: the tester displays 802.3 at instead of 802.3bt present.)
- Inline testing – Measures and displays in rotation between voltage (Volts), current (mA) and power (Watts) via 4 digit 7 segment LEDs, which provides Voltage available, current flowing and how much power an PD actually need ensure a sufficient power for PD.
The tester built-in a Gigabit Ethernet transformer for PoE+ Application with up 1.1 Amps tolerance continuous for each pair total 2.2 Amps to isolate data passes and measure power without interruption of data. It can accurately and continuously measure and display the power level of PoE at In-line testing. They also equipped with a step button for selecting specific test data for easier reading.
The PoE tester is a handy professional diagnostic tool for speed up installing and troubleshooting PoE enabled device, and validating actual power let cable installers to save time surety that PD receives appropriate power.
Note: The tester is battery free and simple plug and play operation major time saver.
- Provides a simple way to test and set up PoE system and troubleshoot connection issues.
- Detects and displays standard active and passive PoE includes type, sources, polarity and power
- Performs both one-site PSE testing for voltage and In-line PSE/PD testing for power
- Determines if switch or outlet has PoE capability and display power at PD connected.
- PSE testing displays PoE type (af/at), power source (End/Mid), polarity and voltage, without need a load.
- In-line testing measures and displays in rotation between voltage (Volts) current (mA) and power (Watts).
- Determines the value of power to ensure that a powered device actually need.
- Confirms your PoE network system for just all the power you do need.
- Built-in Gigabit/PoE+ transformer to isolate data passes without interruption of data.
- Equipped with a step button for selecting specific test data for easier reading.
- Compliant with IEEE 802.3af, at and bt (type3) standard PoE.
- Plug and play for ease of use with battery-free operation.
The PoE tester is a handy professional diagnostic tool for speed up installing and troubleshooting PoE enabled device, and validating actual power let cable installers to save time surety that PD receives appropriate power.
| Connector Interface | : | 2X RJ45 jack (PSE test jack, PD test jack) |
| Display | : | * 2 Yellow LEDs indicate reversed polarity for power type |
| Voltage Range | : | Max 30V to 60V for mode A and Mode B. (1% accuracy) |
| Max Current | : | 750mA for Mode A and Mode B, total 1.5 Amps. |
| Standard compliant | : | IEEE 802.3af (PoE), 802.3at (PoE+), and 802.3bt (PoE++) type3. |
| Operating Temperature | : | 0°C to 50°C |
| Size | : | 99 X 36 X 26mm |
| Weight | : | 50 Grams |
Lan Tracker
Product Code: 41181
The Lan Tracker is a network tester, pin-by-pin cable tester. As a network tester, it detects whether a network is active or inactive and displays network speed (10/100/1000 Mbps) in either case. It also flashes the network hub or NIC’s port light corresponding to the cable it is connected to, to show the cable’s port number. As a cable tester, it performs loop-back or remote tests of network, data, voice, and coaxial cables, displaying the results on a pin-by-pin LED display which moves from pin to pin automatically or manually.
- Detects network speed (10/100/1000 Mbps) of an active OR inactive network.
- Automatic and manual pin-by-pin tests of cable up to 8 pins.
- The manual pin-by-pin test may go forward or backward through pins at user’s option.
- Remote unit included for testing already-installed cables.
- Coaxial F adaptor included for testing coaxial cables.
- Line tester checks circuit polarity and AC/DC voltage to prevent damage to tester.
| Power | : | 9V Alkaline Battery – Main Unit |
| Size | : | Main unit – 126 x 68 x 28 mm Remote Unit – |
| Weight | : | 195g with battery (Shipping weight:320g) |
| Operating Temperature | : | 0 to 450C |
| Material | : | ABS |
| Tone Frequency | : | 800 Hz |
| Cable Type/ Protocols supported | : | UTP, STP, 10 Base-T, Token Ring, TP-PMD, BNC and USOC 8, 4, 2 cables |
| Distance maximum Length | : | 457 Meters |
| Power Consumption | : | 10- 40mA/Sec |
| Output Voltage | : | 5V |
Lan Tester
Product Code: 41182
Multi-Functional Network Cable Tester allows you to test wiring continuity for Cat5e, Cat6, Cat6A, RJ11 6P and RJ45 8P. It Identifies, short circuits, open circuits and miswired Cables. Features two pieces, i.e. transmitter and receiver.
- Tests RJ45 (8P8C) UTP, STP Cable.
- Two-piece design.
- Master Unit provides Patch cord function Test.
- Maximum Testing length up to 305meters
- Durable case with a built-in handle for easy transportation
- Rubber grip feet to prevent the unit from slipping off flat surfaces
- Runs on one 9V battery (included)
- Backed by a 1-year 3C3® Product warranty
Cable Tracer and Toner
Product Code: 41183
Cable Tracer & Toner is a Network/LAN Installation, Maintenance and Troubleshooting Tool. This tool correctly identifies a particular cable from a bundle of cables/ wires. The tool comes with multiple connection options, which enable it to test telecom, Twisted pair cables, coax cable and bare wires.
- Enhancing talk battery power supply, allows communication over inactive Pairs, using telephone test sets
- Tests Cable Continuity,
- Line 1 and Line 2 polarity Testing
- line polarity and voltage in data and voice lines identification.
- Uses tone signal with adjustable volume control
- Two alligator clips, RJ12 Modular cable, RJ45 Jack and a Female coaxial connector included.
| Cable Tracer | ||
| Toner | : | Hi Alternating 500-781 Hz |
| Frequency | : | Lo Alternating 446-657 Hz |
| Talk Battery | : | 9V into a 600 Ohms Circuit |
| Voltage Protection | : | 50VDC or 24 VAC |
| Battery | : | 9V DC standard or alkaline |
| Size | : | 125 x 68 x 26 mm |
| Weight | : | 20 Grams |
| Gain | : | 30db |
| Tip Resistance | : | 30 ohms (plastic tip) |
| Size | : | 210 x 40 x 28mm |
| Weight | : | 140 Grams |
| Operating Temperature | : | 0°C to 40°C |
Data Cable Length Measuring & Fault Locator
Product Code: 41184
Multi-Function data cable length measuring & Fault locator is very easy to operate and to solve cable installation problem. It can be used for a number of applications such as cable connection sequence, length, user jumper and cable connection continuity and determine any open circuit, short circuit, jumper or cross-talk interference
- LCD backlight display
| Display | : | LCD Module (64 mm x 33 mm) |
| Connector Type | : | RJ45, RJ12 ( RJ11 ) & F connector |
| Cable Type | : | Shielded or unshielded, Cat5e, Cat6, Cat7 |
| Cable Length & Accuracy | : | Accuracy of the length measurement is ± 5 % length: 1~350 meters (3~1200 feet) |
| Physical Dimension | : | 195 mm (L) , 90 mm (W) , 40 mm (H) |
| Operating Temperature | : | 00C to 500C |
RELATED PRODUCTS
CALL US
In case you wish to speak to our Customer Help Desk for urgent resolution. +91-80-4851 4828
WRITE TO US
Be it an enquiry, feedback write to us & we’ll get back to you.
sales@3c3.in
sales@3c3.in
LOCATE US
You are never too far away from quick, efficient services. Locate your nearest Dealer Locate us
CALL US
In case you wish to speak to our Customer Help Desk for urgent resolution. +91-80-4851 4828
WRITE TO US
Be it an enquiry, feedback write to us & we’ll get back to you.
sales@3c3.in
sales@3c3.in
LOCATE US
You are never too far away from quick, efficient services.
Locate nearest Dealer
Locate nearest Dealer
